EN 
IT 
ES 
DE 
FR 
PT 
A plastic mold hot runner system is a system used in the injection molding of plastics. The system injects molten plastic into the mold cavity through a heated runner system. This system is used to produce molded parts with intricate designs and tight tolerances. The plastic mold hot runner system is a highly efficient and precise way to produce plastic parts.
Introduction: what is a plastic mold hot runner system?
A plastic mold hot runner system is a system used in injection molding to inject molten plastic into a mold. The system consists of a heated barrel, a manifold, and a set of nozzles. The molten plastic is injected into the mold through the nozzles, and the heat from the barrel keeps the plastic in a liquid state so that it can flow into the mold cavity. The molten plastic is then cooled and hardened in the mold cavity. A plastic mold hot runner system is a highly efficient and precise way to produce plastic parts. The barrel of the hot runner system is typically heated by electric heaters, depending on the equipment used.
The benefits of hot runner system
A plastic mold hot runner system is a system used in injection molding that injects molten plastic into the mold cavity through a heated gate or runner. The system consists of a controller, a power supply, and one or more heating elements. The benefits of using a plastic mold hot runner system include increased productivity, reduced material waste, and improved product quality.
Increased productivity: Injection molding is a fast process, but it can be even faster with a hot runner system. By eliminating the need to stop the flow of molten plastic to change runners or gates, the production process can be continuous. This results in increased efficiency and throughput.
Reduced material waste: Hot runner systems prevent cold slugging, which is when cold plastic builds up in the runners or gates and has to be removed before injection can resume.
improve product quality: Hot runner systems keep the plastic molten during the injection molding process, which helps to prevent defects and inconsistencies in the finished product.
The advantages of using a hot runner system are that it can reduce cycle times, improve product quality, and reduce material waste. Hot runner systems are also more energy efficient than cold runner systems.
The disadvantages of hot runner system
Hot runner systems are often used in plastic injection molding, but they come with some disadvantages.
One disadvantage is that hot runner systems can be more expensive than cold runner systems. Hot runner systems also have a higher installation cost than cold runner systems.
The other disadvantage is that hot runner systems are more complex than cold runner systems. There are many different types of hot runner systems so it can be difficult to identify the best type of system for your specific needs.
Another disadvantage is that hot runner systems can be less forgiving than cold runner systems if there are any problems with the mold or the process. Hot runner systems also require more maintenance than cold runner systems.
101 on hotrunner system structurer
Hot runner system can be seen as an extension of injection molding machinery. The function of the hot runner system is to thermally insulated to send the thermoplastic melt to the plastic mold.
The hot runner can be heated independently while it is thermally insulated in the injection mold, which can compensate for heat loss caused by contact with the “cold” mold surface.
Hot runner molds have been successfully used to shoot various plastic materials.
Almost all plastic materials that can be shot with cold runner molds can be processed with hot runner molds.The minimum injection parts are less than 0.1g, and the maximum injection parts are more than 30kg.
Hot runner molds are widely used in electronics, automobiles, medical, daily necessities, toys, packaging, construction, office equipment and etc., industries
The most important two technical factors:
- The control of plastic temperature;
- The control of plastic flow.
A typical hot runner system consists of the following parts:
- Hot runner manifold;
- Nozzle;
- Temperature controller;
- Auxiliary parts.
Types and Applications
When hot runner is adopted, the correct selection of gate type is very important. The gate directly determines the selection of hot runner system and the mold manufacture.
Therefore, according to different gate types, hot runner systems can be divided into three types:
- Hot tip hot runner system,
- Sprue hot runner system
- valve hot runner system.
Each type of hot runner system has its important characteristics and application.
Many factors need to be considered when selecting gate and hot runner system , among which the most important ones are plastic materials and additives, weight and wall thickness , quality requirements , tool life and production of parts, etc.
Pros:
- Shortening the cycle time ; The use of hot runner system can decrease the cycle time and improve productivity. It helps to reduce the cycle time by 10% to 30%. This is because hot runner system not only speeds up the injection process, but also reduces the amount of cooling time needed for each part.
- Save plastic raw materials; The use of hot runner system can save plastic raw materials compared with other injection molding systems. This is because the material is injected directly into the mold cavity, which means that there is no need for additional processing such as runner removal before it can be used.
- Reduce waste products and improve product quality; The use of hot runner system can reduce waste products and improve product quality. This is because the injection molding process runs more efficiently, which means that there is less material waste. It also means that the products are produced more quickly with better quality control over each step in the process.
- Eliminate of secondary processes, which is conducive to full automation;The use of hot runner system can eliminate secondary processes, which is conducive to full automation. This means that the process can be run with minimal human intervention, which is ideal for large-scale production lines.
- Expand the application of injection molding.Hot runner system can be used in a variety of applications, including automotive parts and other products that require high precision and durability. The hot runner system allows the injection molding process to be more efficient and effective, which means that it can be used to produce a wide range of products.
Cons:
- Higher cost of mold,Hot runner systems are more expensive than conventional injection molding machines, especially in the initial purchase price. However, they can save money over time because they reduce waste and increase productivity.
- Higher requirements for manufacturing process equipment,Hot runner systems require more sophisticated manufacturing equipment than conventional injection molding machines, which means that they may be less accessible to small businesses or companies with limited budgets. They also require more careful operation to ensure proper function and avoid costly downtime.
- Complicated operation and maintenance, etc.Hot runner systems are more complex than conventional injection molding machines, which means they require more training in order to operate properly. This can lead to higher labor costs if you hire a technician or operator with specialized experience. Additionally, hot runner systems may require more frequent maintenance and repairs because of their complex components.
hot tip hot runner system
This system principle is that the HOT TIP located at the front end of the nozzle is matched with the cooling system to accurately adjust and control the plastic molding processing temperature at the gate.
Therefore, the material and shape of the nozzle HOT TIP are very important.
HOT TIP hot runner system can be used to process most crystalline and amorphous plastics such as PP, PE, PS, LCP, PA, PET, PBT, PEEK, POM, PEI, PMMA, ABSPVC, PC, PSU, TPU, etc.
Generally, hot tip gates are mostly used for manufacture small and medium-sized parts, especially for small size parts.
The gate section diameter is mostly between 0.5 mm and 2.0 mm.
The gate diameter is mainly determined by the weight and wall thickness of the parts, and of course, the quality of materials and parts profile should also be considered.
If the gate cross-section diameter is small, the gate will close quickly after the injection filling stage, the gate mark on the part will be small, and the surface of the part will be beautiful and of good quality.
Whereas, the diameter of the gate is too small, the shear rate of the plastic flowing through the gate will be too high, which will seriously damage the molecular chain structure of the plastic melt or additives in the plastic, resulting in unqualified products .
The usual method is to preliminarily determine the gate size according to the wall thickness at the gate of the part: gate diameter =(0.75-1.0) wall thickness at the gate of the part.
For plastics with low processing viscosity, the smaller value is taken; for plastics with high processing viscosity or those sensitive to shear, the larger value is taken.
Usually the hot tip gate is directly cut on the part, or it can be cut on the cold runner and then the cold gate can be opened on the part. This is a mold system that combines hot runner and cold runner.
When hot tip gates are used, there will always be gate marks on the parts. In many cases, the gate mark will be higher than the surface of the part, affecting the aesthetics of the part or the assembly with other parts.
Therefore, when selecting the gate location, the gate should be placed in the recessed shelter on the part as far as possible.
sprue gate hot runner system
A sprue hot runner system is used for injecting plastic into a mold through a sprue, in order to achieve low pressure at the gate. It is more suitable for a medium-sized or heavy injection molding project.
The advantages of this system are that the plastic has low shear rate when flowing through the gate to fill the mold, residual stress after injection molding and deformation is small, and mechanical strength of parts is relatively good.
Compared to hot tip gate, size of sprue gate is larger so gate marks may also be larger. Therefore, in general, hot tip system is often used for molds with strict aesthetic requirements
However, structural parts that do not require high aesthetic standards can be manufactured by the sprue hot runner system.
People also often use the sprue gate in combination with the cold runner, that is, the sprue is used as the main runner and the it is opened on the cold runner.
In this kind of application, the sprue can be opened larger to facilitate plastic flow, because the sprue mark on the cold runner is not important for looking.
Similar to the application of hot-tip hot runner system, the control of plastic temperature and mold temperature at the gate is extremely important.
It is necessary to set up a separate cooling circuit around the gate. Because the size of the sprue gate is relatively large, if the temperature at the gate is not well controlled, the drooling that the gate cannot seal the plastic flowing after the mold is opened will occur.
The sprue insert of the hot runner system also has a variety of sizes, shapes and manufacturing materials, which should be comprehensively considered with the type of plastic (such as crystalline plastic or amorphous plastic) and the cooling condition of the gate.
needle valve hot runner system
The needle valve hot runner system uses the mechanical movement of the needle to open and close the nozzle .
The valve needle is generally controlled by mechanical pneumatic or hydraulic pressure.
In the latter part of the holding time, the hot nozzle opening is closed before the product is completely condensed, which shortens the molding cycle of the plastic parts.
By controlling the gate opening time, needle valve hot runner can ensure smooth cavity filling and melt flow balance, eliminate weld marks.
Two or more hot gates are usually required to fill large injection molded parts. For the common hot runner system, the cavity will be filled at the same time when the injection starts.
This filling style inevitably has weld marks defect, that is, when the two melt fronts meet, because the two melts cannot completely melt into one , a weld mark occur.
Although it can be improved by increasing the melt temperature and the holding pressure , the actual improvement is limited.
Needle valve hot runner can realize the program control of the opening and closing of each valve gate, and it means that it will open the second gate when the first melt just flows through.
At this time, the first gate can be opened or closed as required, and the process continues until all gates are opened and the mold cavity is filled, so that the melt is completely weld, and a product without weld marks is achieved.
Needle valve hot nozzles have many advantages:
- There is little or no trace on the contact surface between valve needle and product . For plastic parts with strict surface requirements, needle valve type is the best choice.
- The gate size is large enough. Large diameter gate can reduce the loss of shear heat and pressure, make the cavity fill faster, help to reduce product stress, reduce product deformation, and improve the quality of plastic parts with complex structures.
- Prevent gate drooling during mold opening, improve product appearance and product consistency.
- When the screw moves backward, the material can be prevented from flowing back from the mold cavity.
- The mechanical movement of the valve needle makes the needle valve hot runner system have better balance and re-peatability.
- More effective control of packing and molding cycle. Needle valve hot runner can use a gate with a larger diameter, which can speed up the flow of melt into the mold cavity, thus shortening the molding cycle time and better maintaining pressure.
Conclusion: is a plastic mold hot runner system right for your project?
A plastic mold hot runner system is a great way to ensure that your project is completed with precision and accuracy. By using this system, you can avoid having to deal with the potential problems that come with using traditional methods of injection molding. In addition, a plastic mold hot runner system can help you save time and money by eliminating the need for costly repairs or replacements.
